La pieza, vista desde este ángulo; arrástrala a la izquierda o a la derecha para girarla

Arrastra para girar · Haz clic para ampliar

Tail Cone

$44.00

SKUTCN-BLK

ColorBlack

Cantidad

1
$44.00

Hecho a pedido. Se envía de 3 a 5 días.

Fits the standard round bottle, 25.5 cm around. The strap fits standard 63 mm cage bosses.

Especificaciones

Especificaciones
Dome outside diameter about 86 mm
Dome height 80 mm: 20 mm skirt plus 60 mm nose
Wall 2 mm, four 0.8 mm grip ribs inside the skirt
Strap 100 x 28 x 3 mm, three M5 slots at 60, 72 and 84 mm
Joint M4 x 10 bolt, DIN 557 square nut, blue threadlocker
Weight about 41 g both parts
Included hardware 1 x M4 x 10 bolt, 1 x M4 square nut

Instalación

  1. Loosen the two cage bolts. Slide the strap under the cage so its slots sit on the bolts. Snug the bolts.
  2. Slide the dome over the bottom of your bottle. The ribs grip the bottle.
  3. Push the strap root into the pocket on the dome skirt until it stops.
  4. Turn the M4 bolt into the nut. Snug plus a quarter turn with a drop of blue threadlocker. Do not overtighten.

Revisa el reglamento de equipamiento de tu evento. La mayoría de los triatlones sin drafting permiten carenados para ánforas. Algunas competencias de contrarreloj no los permiten.

Preguntas

Will it come off on rough roads?

The pocket carries the load and the bolt only clamps. The ribs hold the bottle. We have not had one come off on chip seal, but a strap of tape around the skirt costs nothing.

Is it legal in my race?

Most non-drafting triathlons allow a bottle fairing. Some time trial bodies do not. Check your event's equipment rules before race day.

Will it fit my bottle?

It fits the standard round bottle, 25.5 cm around. That is the common 620 to 750 ml bottle. If yours is a tall insulated bottle, it will not.