Arrastra para girar · Haz clic para ampliar
Capsule
SKUCAP-BLK
Cantidad
Hecho a pedido. Se envía de 3 a 5 días.
Sits in any cage that holds a standard round bottle.
Especificaciones
| Outside diameter | 81.2 mm, matches the 25.5 cm bottle |
|---|---|
| Length | 200 mm: 140 mm body plus 60 mm nose |
| Wall | 2 mm |
| Windows | 2, each 30 x 80 mm, 5 mm corners, starting 40 mm from the rear |
| Inside volume | about 0.6 L |
| Anchors | 4 internal J hooks |
| Weight | about 96 g |
| Included | 4 hair ties |
Instalación
- Loop a hair tie over the two J hooks on one side of a window. Repeat for the other side.
- Slide a tube, a CO2 cartridge and a multitool in through the window. The ties hold them against the wall.
- Drop the capsule in the cage, nose up. It sits like a bottle.
Revisa el reglamento de equipamiento de tu evento. La mayoría de los triatlones sin drafting permiten carenados para ánforas. Algunas competencias de contrarreloj no los permiten.
Preguntas
What fits inside?
A road tube, a 16 g CO2 cartridge with head, a small multitool and one lever. About 0.6 L.
Why hair ties?
They cost nothing, they are everywhere, and a broken one is replaced in ten seconds at the side of the road.
También queda con
Tail Cone
A bullet for the bottom of your bottle. Slides on, bolts to a strap under the cage.
Riser
Lifts a bottle cage 65 mm so the bottle clears your arm pads and sits in cleaner air.
Rail
Moves a cage forward, back, or doubles it. Fifteen positions on a 21 mm pitch.
Starter Kit
The two mounts: one Rail and one Riser in one color. Saves $5.
Pro Kit
The full front end: Rail, Riser and Tail Cone in one color. Saves $11.