Arrastra para girar · Haz clic para ampliar
Riser
SKURIS-BLK
Cantidad
Hecho a pedido. Se envía de 3 a 5 días.
Fits standard 63 mm cage bosses top and bottom. Bolts not included.
Especificaciones
| Lift, foot underside to bar top | 65 mm |
|---|---|
| Top bar | 98 mm long, 14 mm wide, 4 mm thick |
| Top bar holes | 7 holes, 6.35 mm, on a 21 mm base pitch, two 63 mm spans |
| Foot holes | 2 holes, 63 mm apart |
| Leg spacing | 30 mm center to center |
| Fillets | 3 mm inside corners |
| Weight | about 14 g |
| Hardware needed | 4 x M5 cage bolts, buyer supplied |
Instalación
- Remove the cage and its two bolts.
- Bolt the feet to the bosses with the cage bolts. Snug, do not crank.
- Bolt the cage to the top bar with two more M5 bolts, in the pair of holes that puts the bottle where you want it.
Preguntas
Which holes do I use on top?
The seven holes give you two 63 mm spans. Use the front pair to move the bottle forward, the rear pair to keep it back.
Will it hold a full bottle?
Yes. The top bar is 4 mm thick and the legs are short. A full 750 ml bottle is about 800 g.
También queda con
Tail Cone
A bullet for the bottom of your bottle. Slides on, bolts to a strap under the cage.
Rail
Moves a cage forward, back, or doubles it. Fifteen positions on a 21 mm pitch.
Capsule
An aero bottle that holds your tube, CO2 and tool instead of water.
Starter Kit
The two mounts: one Rail and one Riser in one color. Saves $5.
Pro Kit
The full front end: Rail, Riser and Tail Cone in one color. Saves $11.