Arrastra para girar · Haz clic para ampliar
Rail
SKURAI-BLK
Cantidad
Hecho a pedido. Se envía de 3 a 5 días.
Fits standard 63 mm cage bosses through three slots with 8 mm of travel. Bolts not included.
Especificaciones
| Length | 308 mm |
|---|---|
| Width, thickness | 14 mm, 4 mm |
| Positions | 15 on a 21 mm pitch |
| Slots | 3, at positions 5, 8 and 11, 63 mm apart, 8 mm of travel |
| Round holes | 12, 6.35 mm |
| Weight | about 16 g |
| Hardware needed | 2 x M5 frame bolts, 2 or 4 x M5 cage bolts, buyer supplied |
Instalación
- Remove the cage. Bolt the rail to the frame through two of the three slots.
- Slide the rail to the position you want and snug the frame bolts.
- Bolt one or two cages to the round holes, 63 mm apart.
Preguntas
Can I run two bottles?
Yes. Twelve round holes give you room for two cages with a gap between them.
Does it flex?
A little under a full bottle far out on the bar. Keep the cage within 60 mm of a slot for a stiff mount.
También queda con
Tail Cone
A bullet for the bottom of your bottle. Slides on, bolts to a strap under the cage.
Riser
Lifts a bottle cage 65 mm so the bottle clears your arm pads and sits in cleaner air.
Capsule
An aero bottle that holds your tube, CO2 and tool instead of water.
Starter Kit
The two mounts: one Rail and one Riser in one color. Saves $5.
Pro Kit
The full front end: Rail, Riser and Tail Cone in one color. Saves $11.